If you have a good and cheap carrier, please select 'Transport arranged by the client. Pick up goods' . In that case no freight costs will be charged by us.
After checking the number we shall activate this account for resellers and wholesalers. For many (but not for all) items you will find further scaled prices for bigger quantities. There are no lower prices for quantities shown in this consumers shop!
Glasclear candlemould, heat resistant up to 130 C. Fitting to quadruple holder item 8518.
Candle moulds made of polycarbonat. Heat resistant up to 130 Celsius. Good for all waxes. The wick size depends on wax mixture and mould diameter. See here: http://www.candlecraft.info/Wick_sizes/wick_sizes.html
Filling temperature for pure paraffine and smooth surfaces 90 degrees. Leaks can usually be tightened by spraying with cold water. A spray bottle can be ordered under item 8526 in the kerzenstadt.de or in a hardware store. For rough rustik surfaces take low temperatur, near the melting point. The candles must be cool for easy remoulding. Dont apply force, the mould will break! If a candle does not want to get out of the mould at all, put it in the freezer! If this does not work, too, you can melt the candle out of the mould with boiling water. The candle will be destroyed then, not the mould.
Careful with scent oils! Some oils are destroing the surface! Please test on the outer surface first!
You can stop leaking hot wax out of the mould by spraying cold water on the leak. Chaep sprayers: Item Nr. 8526
Glasclear candlemould, heat resistant up to 130 C. Fitting to quadruple holder item 8518.
Candle moulds made of polycarbonat. Heat resistant up to 130 Celsius. Good for all waxes. The wick size depends on wax mixture and mould diameter. See here: http://www.candlecraft.info/Wick_sizes/wick_sizes.html
Filling temperature for pure paraffine and smooth surfaces 90 degrees. Leaks can usually be tightened by spraying with cold water. A spray bottle can be ordered under item 8526 in the kerzenstadt.de or in a hardware store. For rough rustik surfaces take low temperatur, near the melting point. The candles must be cool for easy remoulding. Dont apply force, the mould will break! If a candle does not want to get out of the mould at all, put it in the freezer! If this does not work, too, you can melt the candle out of the mould with boiling water. The candle will be destroyed then, not the mould.
Careful with scent oils! Some oils are destroing the surface! Please test on the outer surface first!
You can stop leaking hot wax out of the mould by spraying cold water on the leak. Chaep sprayers: Item Nr. 8526
Glasclear candlemould, heat resistant up to 130 C. Fitting to quadruple holder item 8518.
Candle moulds made of polycarbonat. Heat resistant up to 130 Celsius. Good for all waxes. The wick size depends on wax mixture and mould diameter. See here: http://www.candlecraft.info/Wick_sizes/wick_sizes.html
Filling temperature for pure paraffine and smooth surfaces 90 degrees. Leaks can usually be tightened by spraying with cold water. A spray bottle can be ordered under item 8526 in the kerzenstadt.de or in a hardware store. For rough rustik surfaces take low temperatur, near the melting point. The candles must be cool for easy remoulding. Dont apply force, the mould will break! If a candle does not want to get out of the mould at all, put it in the freezer! If this does not work, too, you can melt the candle out of the mould with boiling water. The candle will be destroyed then, not the mould.
Careful with scent oils! Some oils are destroing the surface! Please test on the outer surface first!
You can stop leaking hot wax out of the mould by spraying cold water on the leak. Chaep sprayers: Item Nr. 8526
Glasclear candlemould, heat resistant up to 130 C. Fitting to quadruple holder item 8518.
Candle moulds made of polycarbonat. Heat resistant up to 130 Celsius. Good for all waxes. The wick size depends on wax mixture and mould diameter. See here: http://www.candlecraft.info/Wick_sizes/wick_sizes.html
Filling temperature for pure paraffine and smooth surfaces 90 degrees. Leaks can usually be tightened by spraying with cold water. A spray bottle can be ordered under item 8526 in the kerzenstadt.de or in a hardware store. For rough rustik surfaces take low temperatur, near the melting point. The candles must be cool for easy remoulding. Dont apply force, the mould will break! If a candle does not want to get out of the mould at all, put it in the freezer! If this does not work, too, you can melt the candle out of the mould with boiling water. The candle will be destroyed then, not the mould.
Careful with scent oils! Some oils are destroing the surface! Please test on the outer surface first!
You can stop leaking hot wax out of the mould by spraying cold water on the leak. Chaep sprayers: Item Nr. 8526
Glasclear candlemould, heat resistant up to 130 C. Fitting to quadruple holder item 8518.
Candle moulds made of polycarbonat. Heat resistant up to 130 Celsius. Good for all waxes. The wick size depends on wax mixture and mould diameter. See here: http://www.candlecraft.info/Wick_sizes/wick_sizes.html
Filling temperature for pure paraffine and smooth surfaces 90 degrees. Leaks can usually be tightened by spraying with cold water. A spray bottle can be ordered under item 8526 in the kerzenstadt.de or in a hardware store. For rough rustik surfaces take low temperatur, near the melting point. The candles must be cool for easy remoulding. Dont apply force, the mould will break! If a candle does not want to get out of the mould at all, put it in the freezer! If this does not work, too, you can melt the candle out of the mould with boiling water. The candle will be destroyed then, not the mould.
Careful with scent oils! Some oils are destroing the surface! Please test on the outer surface first!
You can stop leaking hot wax out of the mould by spraying cold water on the leak. Chaep sprayers: Item Nr. 8526
Glasclear candlemould, heat resistant up to 130 C. Fitting to quadruple holder item 8518.
Candle moulds made of polycarbonat. Heat resistant up to 130 Celsius. Good for all waxes. The wick size depends on wax mixture and mould diameter. See here: http://www.candlecraft.info/Wick_sizes/wick_sizes.html
Filling temperature for pure paraffine and smooth surfaces 90 degrees. Leaks can usually be tightened by spraying with cold water. A spray bottle can be ordered under item 8526 in the kerzenstadt.de or in a hardware store. For rough rustik surfaces take low temperatur, near the melting point. The candles must be cool for easy remoulding. Dont apply force, the mould will break! If a candle does not want to get out of the mould at all, put it in the freezer! If this does not work, too, you can melt the candle out of the mould with boiling water. The candle will be destroyed then, not the mould.
Careful with scent oils! Some oils are destroing the surface! Please test on the outer surface first!
You can stop leaking hot wax out of the mould by spraying cold water on the leak. Chaep sprayers: Item Nr. 8526
Glasclear candlemould, heat resistant up to 130 C. Fitting to quadruple holder item 8518.
Candle moulds made of polycarbonat. Heat resistant up to 130 Celsius. Good for all waxes. The wick size depends on wax mixture and mould diameter. See here: http://www.candlecraft.info/Wick_sizes/wick_sizes.html
Filling temperature for pure paraffine and smooth surfaces 90 degrees. Leaks can usually be tightened by spraying with cold water. A spray bottle can be ordered under item 8526 in the kerzenstadt.de or in a hardware store. For rough rustik surfaces take low temperatur, near the melting point. The candles must be cool for easy remoulding. Dont apply force, the mould will break! If a candle does not want to get out of the mould at all, put it in the freezer! If this does not work, too, you can melt the candle out of the mould with boiling water. The candle will be destroyed then, not the mould.
Careful with scent oils! Some oils are destroing the surface! Please test on the outer surface first!
You can stop leaking hot wax out of the mould by spraying cold water on the leak. Chaep sprayers: Item Nr. 8526
Glasclear candlemould, heat resistant up to 130 C. Fitting to quadruple holder item 8518.
Candle moulds made of polycarbonat. Heat resistant up to 130 Celsius. Good for all waxes. The wick size depends on wax mixture and mould diameter. See here: http://www.candlecraft.info/Wick_sizes/wick_sizes.html
Filling temperature for pure paraffine and smooth surfaces 90 degrees. Leaks can usually be tightened by spraying with cold water. A spray bottle can be ordered under item 8526 in the kerzenstadt.de or in a hardware store. For rough rustik surfaces take low temperatur, near the melting point. The candles must be cool for easy remoulding. Dont apply force, the mould will break! If a candle does not want to get out of the mould at all, put it in the freezer! If this does not work, too, you can melt the candle out of the mould with boiling water. The candle will be destroyed then, not the mould.
Careful with scent oils! Some oils are destroing the surface! Please test on the outer surface first!
You can stop leaking hot wax out of the mould by spraying cold water on the leak. Chaep sprayers: Item Nr. 8526
Wick needle for single or halved moulds for tensioning the wick. The wick is inserted into the mould and knotted on the external side. The other end of the wick is pulled taut and is kept taut by the needle.
Glasclear candlemould, heat resistant up to 130 C. The mould is made of two parts, one back and one front part. Fitting to quadruple holder item 8518.
Candle moulds made of polycarbonat. Heat resistant up to 130 Celsius. Good for all waxes. The wick size depends on wax mixture and mould diameter. See here: http://www.candlecraft.info/Wick_sizes/wick_sizes.html
Filling temperature for pure paraffine and smooth surfaces 90 degrees. Leaks can usually be tightened by spraying with cold water. A spray bottle can be ordered under item 8526 in the kerzenstadt.de or in a hardware store. For rough rustik surfaces take low temperatur, near the melting point. The candles must be cool for easy remoulding. Dont apply force, the mould will break! If a candle does not want to get out of the mould at all, put it in the freezer! If this does not work, too, you can melt the candle out of the mould with boiling water. The candle will be destroyed then, not the mould.
Careful with scent oils! Some oils are destroing the surface! Please test on the outer surface first!
You can stop leaking hot wax out of the mould by spraying cold water on the leak. Chaep sprayers: Item Nr. 8526 Size:h=150mm
Glasclear candlemould, heat resistant up to 130 C. Fitting to quadruple holder item 8518.
Candle moulds made of polycarbonat. Heat resistant up to 130 Celsius. Good for all waxes. The wick size depends on wax mixture and mould diameter. See here: http://www.candlecraft.info/Wick_sizes/wick_sizes.html
Filling temperature for pure paraffine and smooth surfaces 90 degrees. Leaks can usually be tightened by spraying with cold water. A spray bottle can be ordered under item 8526 in the kerzenstadt.de or in a hardware store. For rough rustik surfaces take low temperatur, near the melting point. The candles must be cool for easy remoulding. Dont apply force, the mould will break! If a candle does not want to get out of the mould at all, put it in the freezer! If this does not work, too, you can melt the candle out of the mould with boiling water. The candle will be destroyed then, not the mould.
Careful with scent oils! Some oils are destroing the surface! Please test on the outer surface first!
You can stop leaking hot wax out of the mould by spraying cold water on the leak. Chaep sprayers: Item Nr. 8526 Size:h=190 d=45x145mm
Glasclear candlemould, heat resistant up to 130 C. Fitting to quadruple holder item 8518.
Candle moulds made of polycarbonat. Heat resistant up to 130 Celsius. Good for all waxes. The wick size depends on wax mixture and mould diameter. See here: http://www.candlecraft.info/Wick_sizes/wick_sizes.html
Filling temperature for pure paraffine and smooth surfaces 90 degrees. Leaks can usually be tightened by spraying with cold water. A spray bottle can be ordered under item 8526 in the kerzenstadt.de or in a hardware store. For rough rustik surfaces take low temperatur, near the melting point. The candles must be cool for easy remoulding. Dont apply force, the mould will break! If a candle does not want to get out of the mould at all, put it in the freezer! If this does not work, too, you can melt the candle out of the mould with boiling water. The candle will be destroyed then, not the mould.
Careful with scent oils! Some oils are destroing the surface! Please test on the outer surface first!
You can stop leaking hot wax out of the mould by spraying cold water on the leak. Chaep sprayers: Item Nr. 8526 Size:h=230 d=82x42mm
13,95 EUR
incl. 19 % Tax excl.
Genious candle wax, brandnew! Only in the candlecraftcenter.com! Create candles without melting wax!
New: Present Art - superior level gift ideas! Look here
For all individually printed candles there is a upload possibility after the order process. You also can send the picture as a mail attachement to pix@fotokerzen.de. Please write the same name and city as you used in the order!
Main page » Catalogue » Candlemoulds
Information about candle making materials and techniques in english language
